Version: 5.10.x

How to Configure the CMS from the DevOps Console

From the DevOps Console you can easily configure and manage your CMS.


Remember that before you can configure the CMS you must have already created your collections in the Collections area and displayed the related Endpoints.

Categories and Pages#

The CMS consists of categories and pages. Pages and categories form the basis of the CMS information architecture.

The Categories are useful for grouping similar pages within them. The categories appear only in the CMS menu and represent a different section of the menu.

To give an example: in our CMS of the Library we will create the Category Authors and inside we will place the different Pages for the types of writer: novelist, poet, screenwriter, etc ...

The Pages are used to represent the data of a collection. Within the Pages you can manage your collections and the data in it.


Before creating Pages or Categories try to build the information architecture of your CMS. It will be much simpler at that point to know what to create.

How to create a Category#

To create a category, simply enter the Name of the Category you want to display on the CMS and the display order.


We advise you to always order by following the tens order. If we want our Category to be the first in the CMS, then we will write 10. This will facilitate the change of order of the Categories.

In our case, we added a Category for the writers: Name = Authors and it will be placed second with the Order = 20

How to create a Page#

In order to create a Page, click the blu button Create new page and it will be showned as follow:

The creation of a page consists of 2 steps:

  1. Configure the menu area
  2. Configure the general settings

Configure the Menu Area#

In this section you can choose how to represent the page in the CMS side menu. Let's take the example of the Novelist page.

Name: You will need to enter the name to be displayed in the menu to represent your page: Novelist.

Endpoint: You will have to choose which endpoint to hook your page to.

Category: You will have to choose your page in which category will be inserted. In our case we will hook the Authors category

Icon: You can choose whether to assign an icon to your page that represents it in the CMS. As an example: you can choose the fas fa-book icon to represent you page that contains books. At this link you can view and choose all the available icons.


  1. Mia-Platform supports only the solid, free icon up to version 5.3.0
  2. You should write the full name of the icon. books is not enough. You should write fas fa-book

Order: With Order you can choose what order to give to your page within a category. We advise you to give the pages a number belonging to the tens order (ex: page 1 will have the order 10)

Configure the General Settings#

In this section you can choose the general configurations of your page.

Layout: you can decide the layout you want to give to your collection. The possible layouts are:

  • Table is the most classic table view mode.

  • TableUser is the display mode for users. It has in fact a special Reset Password field at the beginning of the table.

  • TablePush instead is the perfect table for push notification or to send notifications to customers. Next to the table you will always find a push button to inject the content to your customers.

  • Card each item will be represented similar to a card. To be able to view the card it will be necessary to configure it, to do so, find how to do it at the following link.

  • Gallery is instead the perfect representation for images.

Highlight a field: this select shows you the properties that are boolean in your page. You can in fact choose to highlight a boolean property in the CMS. If the property is true you will see it highlighted in bold.

Permanently Delete: activating this check choose to permanently delete an element from the database. Appears when you want to delete an item in Trash.

Block: activating this check choose to permanently block a page. In this way CMS will not be able to create new elements.

Hide: by activating this check, choose to hide a page.

Apply a filter: in this field you can apply a visibility filter to your page. To write a query we recommend two links: 1) the different types of query 2) all types of [operators] (https: // that you can use.

Let's take an example: in my collection I have a property that is the same as state (indicates the state). In this page I want to see only the data that have how state = a working. In this page I want to see only the data that have how state = a working. The query will be: {"state": "working"} An example of a more complex query in which, for example, I want to say that the state property must be equal to those stored or rejected can be written as follows: {"$ or": [{"state": "archived"}, { "state": "refused"}]}

Customizing properties#

To make your CMS perfectly compatible with your needs, the last section on which you will be working is your property.

The properties section allows you to customize every single property. We can divide this complex area into several parts:

  1. the general settings of a company
  2. visibility filters
  3. the area of the lookups

1. The general settings of a property#

For each property you can configure different fields that allow you to improve the user experience in the CMS:

  • Interface Type: Depending on the type of property defined in the collection, you can choose whether to improve the visibility of that property. Interface types can be of different types:

  • string if it is a classic text string;

  • number if it is a number;

  • datetime is instead a complete date with hours, minutes and seconds;

  • boolean if it can only be true or false; text if we want the content to be read as html;

  • Text if you wanna write a description with heading, bold, italic and many other features. You will save it as a HTML text.

  • textArea if it is a text field, for example a description, but you dont'wanna make any particular configuration on it and you save it as a string plane;

  • Lookup are used to select some values or between a range of values chosen by me or between a range of values taken from another collection. If you are interested in the theme of the Lookups below you will find a dedicated section;

  • Multilookup if you want to select multiple values;

  • Array if you want to save it as an ordered set of properties;

  • Object is a set of properties not ordered;

  • Geopoint if you want me to save a specific place;

  • Files if it is a file such as an image or a pdf. In our case we will choose string simply wanting to write the name of the title.

  • Label: is the name you want to be displayed in the CMS.

  • Description: you can enter the description of your property.

  • Order: indicates the order of the property in the CMS display. Remember to use the tens meter (the first is the number 10), this will make it easier for you to manage the subsequent changes.

  • Location on the card: if you have chosen the Card display mode you can choose in which position of the card to display your property. For more information follow this link

  • Editable: if you activate this check the property can be modified by anyone, otherwise it will not be editable by CMS

  • Visibility: indicates at what level of the CMS you want to show a property. Layers can be: Hidden and is not visible; All and is visible in the main table; Detail and Modal and it is visible when you click in the table, in the right area of ​​your CMS, at this level you tend to put non-priority information, but which bring value, eg: in-depth information. Last is only in modal: Modal that is when I click Expand from the Side edit area.

2. The visibility filters#

In this section you can control the visibility of a property. You can either refuse to make your property appear only under certain conditions.

Visibility can be controlled in two stages:

  1. in the process of creating a new element in the CMS
  2. when editing an item

Control being created#

To control visibility during creation, you must choose which other property affects its visibility.

What should I do?

  1. choose the property, I have a select that shows me all my properties.

  2. choose the comparator. The supported comparators are the following:

    <=less or equal
    > =greater or equal
    ! =different
    ===strictly equal
    ! ==strictly different
  3. choose the value.

Control when editing an element#

To control the visibility when editing an item, you must follow the same steps for checking when creating. However, your property will only appear this time when you want to change an item from CMS.

You will always have to:

  1. choose the property.
  2. choose the comparator.
  3. choose the value.

To give an example: I have a CMS that manages the warehouse of a supermarket, I am in the property expiry date, I want this property to appear only when the perishable property is equal to true.

  1. choose the property, I choose perishable.
  2. choose the comparator, in our case ==
  3. choose the value, in our case true

3. The Lookups#

Lookups let you show in a property or preset values you choose, or show data from another collection.

In fact, there are two types of Lookup:

  • Look a collection: which allows you to show data from another collection
  • Inline Source: which allows you to set values to show.

At this point the options diverge.

Look a collection#

When you select Look a collection you will have to fill in two values:

  1. Collection ID: you will see a select and you will have to choose the collection whose data you want to show
  2. Value to save: you will see a select and you will have to choose which property of the collection to save. It is generally advisable to save the id.

Inline Source#

When you select Inline Source you will need to fill in two values:

  • The data you want to view: in this field you will need to insert an array of objects you want to view. Remember to differentiate the value to be saved in the database with what you want to show your end user.

Let's take an example: I have a property that has been and I want from the CMS to be able to select only specific states such as Pending, In Processing etc. Here's how I'll have to build the array of objects:

[{"name": "In Processing", "value": "working"}, {"name": "Pending", "value": "pending"}, {"name": "Archived", " value ":" archived "}]
  • Value to be saved: you will have to choose which value to save in the DB, in this case we advise you to save the value.

How to view the data of a Lookup#

From a Look up you can also configure additional features that allow you to meet any viewing need.

  • Visible properties: Here you can choose which properties of your collection or the inline source created to show. The properties you want to show should be entered as if it were an array of strings. So if for example we wanted to show only the name, the array will be: ["name"]. If we want to show the name and surname it will instead be: ["name", "surname"].

  • Delimiter: the delimiters are used when I have chosen to show more than one property and I want to insert a delimiter between the two properties. Ex: if before I chose to show the name and surname properties and I want that between the two there is a hyphen I will have to write the hyphen in an array of strings. The delimiter will then be: ["-"]

  • Filter: I can also choose to set a filter to visibility. To write a query we suggest two links: 1) the different types of queries 2) all types of operators that you can use. Let's take an example: in this lookup I want to see only the data that have state = a working. The query will be: {"state": "working"}

  • Limit: I can set a maximum number of items to display in my Lookup

  • Automatic Reset: if we want to reset, that is after having compiled the cell if we want to empty it

  • Automatic Selection: if we want you to select the first value automatically

  • Live search: if we want that while we are writing we will see the results (ex: I write A and they appear under the publishing houses that begin with A)


An example of Lookup on the weapons collection: An example of Lookup on the weapons collection

4. Create a button#

From the DevOps Console you can also choose to configure buttons. The buttons are actions that you want to do on a data or a set of data.

The buttons will be displayed in the central area of the CMS near the other buttons.

To create a button, go to the Buttons section and configure the following fields:

  • ID: represents the field that uniquely identifies the action. it is an unmodifiable field
  • Label: represents the name you want to appear in the CMS
  • Route: in this field you will have to enter the route to which your action should point
  • Icon: for each button you can also set an icon

In the DevOps Console, you will then be able to conveniently view the buttons created.


Example of a button
Let's take an example of a button on the Authors page. The button will get info.

  • id: info
  • label: Info
  • route: /test
  • icon: info

Here you can see how our button will appear:

4.1. Advanced configurations#

Once you created the button on the CMS, you have to configure the Advanced Configurations of your project, otherwise the CMS will not find the created route.

Based on the route that you want to call from CMS, you have to configure one or both of the following files:

In the example, we will receive from the CMS a POST call to the /documents-creator/contracts-comparison-cms endpoint and we have to redirect this call to the documents-creator service at the /contracts-comparison-cms path; to do this we have to:

  1. edit the maps-proxyBackOfficeName.before file by adding the following line: "~^POST-/documents-creator/contracts-comparison-cms(?<path>.*)" "/contracts-comparison-cms$path";

  2. edit the maps-proxyBackOfficeUrl.before file by adding the following line: "~^POST-/contracts-comparison-cms(?<path>.*)" "/contracts-comparison-cms$path";

otherwise the CMS will not find the path to consume the REST service.

4.2. What does the button do#

Once you correctly configured the Advanced section files, you can use the button to send a POST request to your custom endpoint, but what you will receive in the request body?

The request body will contain the following data:

  • actionId: the ID that you set in the creation phase of the button (in the example above is info)

  • payload: an array of the rows (CMS elements) selected by the user; every element of the array will contain a record of the CRUD, with all the information of the record, id and CRUD custom fields included.